Chapter 21 Configuration: Link Aggregation
GS1900 Series User’s Guide
127
21.2.5 The LAG Port Edit Screen
Use this screen to edit a LAG port. Click Configuration > Link Aggregation > LAG Port > Edit
to open this screen.
Figure 109 Configuration > Link Aggregation > LAG Port > Edit
The following table describes the labels in this screen.
21.2.6 The LACP Port Screen
Use this screen to view LACP Port settings. Click Configuration > Link Aggregation > LACP Port
to open this screen.
Table 91 Configuration > Link Aggregation > LAG Port > Edit
LABEL DESCRIPTION
LAG Port Edit
LAG Displays the LAG index values.
State Select the state to be Enable or Disable.
Speed Displays the speed value as Auto, Auto-10M, Auto-100M, Auto-1000M, Auto-10/
100M, 10M, 100M, or 1000M.
Flow Control Select Enable to use the flow control feature.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
