Chapter 30 Configuration: Management
GS1900 Series User’s Guide
207
Figure 191 Configuration > Management > Remote Access Control > Profile > Add/Modify
The following table describes the labels in this screen.
Table 173 Configuration > Management > Remote Access Control > Profile > Add/Modify
LABEL DESCRIPTION
Management Access List Add
No. Enter the priority level of the entry. The value can be between 1 and 16.
Action Select the action value. The values are Permit or Deny.
Port Select a value in Available and click the Add (>) icon to transfer to the Acting column.
Select a value in Acting and click the Remove (<) icon to transfer to the Available column.
Source Select the source IP value. The options are ALL or IPv4/Wildcard.
IPv4/Wildcard Select and enter the IPv4/Wildcard source.
Service Select the service to use for remote access. The values are ALL, HTTP, HTTPS, or SNMP.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
