Chapter 24 Configuration: Multicast
GS1900 Series User’s Guide
140
Figure 121 Configuration > Multicast > IGMP > Profile
The following table describes the labels in this screen.
24.2.7 The Add/Edit Profile Screen
Use this screen to configure the IGMP Profile settings. Click Configuration > Multicast > IGMP
> Profile > Add/Modify to open this screen.
Figure 122 Configuration > Multicast > IGMP > Profile > Add/Modify
The following table describes the labels in this screen.
Table 103 Configuration > Multicast > IGMP > Profile
LABEL DESCRIPTION
IGMP Profile
Add Click Add to create a new IGMP Profile entry.
Profile No. Displays the Profile No.
Group from Displays the profile start group IP address.
Group to Displays the profile end group IP address.
Action Displays the action of the profile as Permit or Deny.
Modify
Edit Click Edit to make changes to the entry.
Delete Click Delete to remove the entry.
Table 104 Configuration > Multicast > IGMP > Profile > Add/Modify
LABEL DESCRIPTION
IGMP Profile
Profile No. Enter the Profile No.
