A SERVICE OF

logo

GS1900 Series User’s Guide 190
CHAPTER 30
Configuration: Management
30.1 Overview
This section provides information for Management in Configuration.
Use the Management screens to configure settings on the Switch. The following submenus are
accessed from this section: Syslog, SNMP, Error Disable, HTTP/HTTPS, Users, Remote
Access Control.
30.2 Syslog
30.2.1 The Global Screen
Use this screen to view the Global settings. Click Configuration > Management > Syslog to
open this screen.
Figure 170 Configuration > Management > Syslog
The following table describes the labels in this screen.
Table 152 Configuration > Management > Syslog
LABEL DESCRIPTION
Global
State Select the global logging setting to be enabled or disabled.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.