Chapter 4 The Web Configurator
GS1900 Series User’s Guide
29
4 Click Login. If you logged in using the default user name and password, getting start appears. The
Getting Start screen appears every time you log in using the default user name and default
password.
4.3 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Getting Start screen.
This guide uses the GS1900-8HP screens as an example. The screens may vary slightly for different
models.
Figure 16 The Web Configurator’s Main Screen
The Web Configurator’s main screen is divided into these parts:
• A - Title Bar
• B - Navigation Panel
• C - Main Window
4.3.1 Title Bar
The title bar provides some useful links that always appear over the screens below, regardless of
how deep into the Web Configurator you navigate.
Figure 17 Title Bar
The icons provide the following functions.
Table 5 Title Bar: Web Configurator Icons
LABEL DESCRIPTION
Logout Click this to log out of the Web Configurator.
OK Click OK to apply the changes.
Cancel Click Cancel to discard the changes.
Save Click this to apply your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
