Chapter 17 Configuration: System
GS1900 Series User’s Guide
92
17.3 Time
The Time option is used to setup the system time and SNTP (Simple Network Time Protocol) server
settings.
17.3.1 The System Time Screen
In the navigation panel, click Configuration > System > Time > System Time to display the
screen as shown.
Figure 73 Configuration > System > Time > System Time
The following table describes the labels in this screen.
IPv6 Address Enter the IPv6 address of the Switch in the IP domain.
Gateway Enter the IPv6 address of the default outgoing gateway.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
Table 55 Configuration > System > IP > IPv6 (continued)
LABEL DESCRIPTION
Table 56 Configuration > System > Time
LABEL DESCRIPTION
System Time
Enable SNTP Select Enable to enable using a simple network time protocol (SNTP) server to manage the
system time or Disable to manually manage system time.
Manual Time Select the system date and time values from the dropdown lists.
Time Zone Select the time zone from the dropdown list.
Daylight Saving
Time
Select Enable to use Daylight Saving Time to offset the system time or Disable not adjust
system time.
