Chapter 30 Configuration: Management
GS1900 Series User’s Guide
200
The following table describes the labels in this screen.
30.3.10 The Trap Destination Add/Modify Screen
Use this screen to configure the Trap Destination settings. Click Configuration > Management
> SNMP > Trap Destination > Add/Modify to open this screen.
Figure 184 Configuration > Management > SNMP > Trap Destination > Add/Modify
The following table describes the labels in this screen.
Table 165 Configuration > Management > SNMP > Trap Destination
LABEL DESCRIPTION
SNMP Trap Host
Add Click Add to create a new SNMP Trap Host entry.
Server Address Displays a string identifying the server address that this entry belongs to.
Version Indicates the SNMP trap supported version. Possible versions are:
• SNMP v1: Set SNMP trap supported version 1.
• SNMP v2c: Set SNMP trap supported version 2c.
• SNMP v3: Set SNMP trap supported version 3.
Community/
User Name
Displays the community / user name that this entry belongs to.
UDP Port Displays the trap use destination for the UDP port.
Action
Delete Click Delete to remove the entry.
Table 166 Configuration > Management > SNMP > Trap Destination > Add/Modify
LABEL DESCRIPTION
SNMP Trap Destination
Server Address Enter a string identifying the server address that this entry belongs to.
Version Select the SNMP trap supported version. Possible versions are:
• SNMP v1: Set SNMP trap supported version 1.
• SNMP v2c: Set SNMP trap supported version 2c.
• SNMP v3: Set SNMP trap supported version 3.
