A SERVICE OF

logo

5 - PROCEDURES
112
190-00357-00 Rev C
RNAV Approach Procedures
TheGNS500WSeriesallowsforyingLNAV,LNAV/VNAV,LNAV+VandLPVapproachesaccordingtothe
published chart.
HSI
Annunciation
Description Minimums
L/VNAV Lateral Navigation/Vertical Navigation. RNAV non-precision approach with advisory
vertical guidance.
Published LNAV/VNAV
minimums.
LNAV Lateral Navigation. RNAV non-precision approach. Published LNAV mini-
mums.
LNAV + V Lateral Navigation with Advisory Vertical Guidance. RNAV non-precision LNAV
approach with advisory vertical guidance. The glidepath is typically denoted by
a light dashed line on the vertical profile (Jeppeson only) with an associated
glidepath angle (usually in the 3.00 degree range) and is provided to assist the
pilot in maintaining a constant vertical glidepath, similar to an ILS glideslope.
Published LNAV mini-
mums.
LPV Lateral Precision with Vertical guidance (LPV) approach.
RNAV precision approach.
Published LPV mini-
mums.
LNAV Approach
After you cross the FAF (LOTKE), follow the
guidance provided to the MAP (RW31).
8. When viewing the Map Page, you’ll note
that the final course segment is displayed in
magenta (the active leg of the flight plan always
appears in magenta).
9. As you approach the MAP, a waypoint message
(“Next DTK 312° in x sec”) appears on the
bottom of the screen.
10. Once the unit crosses the MAP (defined as
the runway end waypoint), sequencing will
be suspended. Prepare the aircraft for missed
approach operation. Press the OBS key to
sequence to the Missed Approach procedure.
After you cross the MAP and go to the MAHP,
follow the guidance provided.
11. Fly the guidance provided by the unit to the
ARTTY intersection and hold.