Filter
Top Products
Bengal Brute Common Section 6 - 73
TIP REPLACEMENT PROCEDURE
CARBIDE TIP REPLACEMENT
1. Heat face of tip to dull orange, remove tip, then brush tooth body clean of all
debris (carbon).
2. Apply acetone to socket rail on tooth body and allow it to evaporate. Dab on
soldering paste (black flux) to socket rail of tooth body and slide pre-tinned tip into
place.
3. Then heat tip sides and base of socket rail to ensure silver solder flows completely
around base of tip. Grasp tip with tweezers and gently twist tip back and forth to
ensure complete bonding of silver solder
4. Discontinue heat, and allow to cool. Then check braze by gently tapping tip with
rubber mallet.