Filter
Top Products
Command Groups
TDS Family Oscilloscope Programmer Manual
2–31
Table 2–21: Trigger Commands (Cont.)
Header Description
TRIGger:MAIn:HOLDOff:ACTUal?
(TDS 500C, 600B & 700C)
Return main trigger holdoff value in seconds
TRIGger:MAIn:HOLDOff:BY
(TDS 500C, 600B & 700C)
Main trigger holdoff default
TRIGger:MAIn:HOLDOff:TIMe
(TDS 500C, 600B & 700C)
Main trigger holdoff time
TRIGger:MAIn:HOLDOff:VALue
(TDS 400A & 510A)
Main trigger holdoff value
TRIGger:MAIn:LEVel Main trigger level
TRIGger:MAIn:LOGIc?
(TDS 510A, 500C, 600B, & 700C)
Returns main logic trigger parameters
TRIGger:MAIn:LOGIc:CLAss
(TDS 510A, 500C, 600B, & 700C)
Logic trigger input usage
TRIGger:MAIn:LOGIc:FUNCtion
(TDS 510A, 500C, 600B, & 700C)
Logic trigger input combining
TRIGger:MAIn:LOGIc:INPut?
(TDS 510A, 500C, 600B, & 700C)
Return main logic trigger input settings
TRIGger:MAIn:LOGIc:INPut:CH<x>
(TDS 510A, 500C, 600B, & 700C)
Logic trigger expected channel state
TRIGger:MAIn:LOGIc:PATtern:
INPut:CH4
(TDS 510A, 500C, 600B, & 700C)
Logic trigger expected for channel 4 pattern
class
TRIGger:MAIn:LOGIc:PATtern:WHEn
(TDS 510A, 500C, 600B, & 700C)
Main logic pattern trigger condition
TRIGger:MAIn:LOGIc:PATtern
:WHEn:LESSLimit
(TDS 510A, 500C, 600B, & 700C)
Maximum time the selected pattern may be
true and still generate main logic pattern
trigger
TRIGger:MAIn:LOGIc:PATtern
:WHEn:MORELimit
(TDS 510A, 500C, 600B, & 700C)
Minimum time the selected pattern may be
true and still generate main logic pattern
trigger
TRIGger:MAIn:LOGIc:SETHold:
CLOCk:EDGE
(TDS 500C, 600B & 700C)
Clock edge polarity for setup and hold violation
triggering
TRIGger:MAIn:LOGIc:SETHold:
CLOCk:LEVel
(TDS 500C, 600B & 700C)
Setup/Hold clock voltage trigger level
TRIGger:MAIn:LOGIc:SETHold:
CLOCk:SOUrce
(TDS 500C, 600B & 700C)
Setup/Hold clock input source