Filter
Top Products
Command Descriptions
2–268
TDS Family Oscilloscope Programmer Manual
TRIGger:DELay:EDGE:COUPling { AC (TDS 400A, 510A) | DC | HFRej
(TDS 400A, 510A) | LFRej (TDS 400A, 510A) | MAINTrigger (TDS 500C,
600B & 700C only) | NOISErej }
TRIGger:DELay:EDGE:COUPling?
COUPlingTRIGger : : EDGEDELay :
<Space>
?
NOISErej
LFRej
HFRej
DC
AC
MAINTrigger
AC selects AC trigger coupling (TDS 400A, 510A).
DC selects DC trigger coupling.
HFRej coupling removes the high frequency components of the DC signal
(TDS 400A, 510A).
LFRej coupling removes the low frequency components of the AC signal
(TDS 400A, 510A).
MAINTrigger coupling sets the delayed trigger coupling to match the setting on
the main trigger (TDS 500C, 600B & 700C only).
NOISErej selects DC low sensitivity.
TRIGGER:DELAY:EDGE:COUPLING DC
sets the delay trigger to DC coupling.
TRIGGER:DELAY:EDGE:COUPLING?
might return LFREJ for the delayed trigger coupling.
TRIGger:DELay:EDGE:SLOpe
Selects either a rising or falling edge for the delayed trigger. This command is
equivalent to selecting Slope in the Delayed Trig menu.
Trigger
Syntax
Arguments
Examples
Group