Filter
Top Products
Command Descriptions
2–176
TDS Family Oscilloscope Programmer Manual
Table 2–32: Record Length Values (<NR1>)
Configuration
TDS 420A,
TDS 430A,
TDS 460A
TDS 510A,
TDS 520C,
TDS 724C
TDS 600B
TDS 540C,
TDS 754C,
TDS 784C
Standard 500,
1000,
2500,
5000,
15000,
30000
500,
1000,
2500,
5000,
15000
50000
500,
1000,
2500,
5000,
15000
500,
1000,
2500,
5000,
15000,
50000
Option 1M
(not on the TDS
510A)
or 2M
(TDS 500C &
700C only)
60000,
120000
TDS 520C &
724C:
75000,
100000,
130000,
250000
75000,
100000,
130000,
250000,
500000
HORIZONTAL:RECORDLENGTH 2500
specifies that 2500 data points will be acquired for each record.
HORIZONTAL:RECORDLENGTH?
might return 15000 as the number of data points per record.
HORizontal:RECORDSTART
TDS 500C & 700C Only
Set the selected live channel’s record start that is to be used in the extended-ac-
quisition–length mode. In other words, it indicates where the waveform starts
within the extended acquisition record (see Figure 2–4 on page 2–41).
Horizontal
HORizontal:POSition
HORizontal:RECORDSTART <NR3>
HORizontal:RECORDSTART?
Examples
Group
Related Commands
Syntax