Filter
Top Products
Command Descriptions
2–288
TDS Family Oscilloscope Programmer Manual
TRIGger:MAIn:HOLDOff:VALue <NR1>
TRIGger:MAIn:HOLDOff:VALue?
<NR1>
TRIGger
:
:
MAIn
HOLDOff
VALue
:
?
<Space>
<NR1> is from 0 to 100, and is a percent of the holdoff range.
TRIGGER:MAIN:HOLDOFF:VALUE 10
set the holdoff value to be 10% of the holdoff range.
TRIGger:MAIn:LEVel
Sets the main trigger level. This command is equivalent to adjusting the
front-panel TRIGGER MAIN LEVEL knob.
With Communications triggers, this command makes no change to AMI
thresholds. It does change CMI and NRZ levels. It makes no change to value
ranges.
Trigger
TRIGger:MAIn:LEVel { ECL | TTL | <NR3> }
TRIGger:MAIn:LEVel?
TRIGger :
:
MAIn
LEVel
<Space>
ECL
?
TTL
<NR3>
ECL specifies a preset ECL level of –1.3 V.
TTL specifies a preset TTL level of 1.4 V.
<NR3> is the main trigger level, in volts.
TRIGGER:MAIN:LEVEL?
might return TTL, indicating that the main edge trigger is set to 1.4 V.
Syntax
Arguments
Examples
Group
Syntax
Arguments
Examples