Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–317
TRIGGER:MAIN:PULSE:SLEWRATE:WHEN FASTERTHAN
sets the slew rate trigger to work when the slew is faster than the set volts/second
rate.
TRIGger:MAIn:PULse:SOUrce
TDS 510A, 500C, 600B, & 700C Only
Sets or queries the source for the main pulse trigger. This is equivalent to
selecting the source in the Pulse Runt Source side menu.
Trigger
TRIGger:MAIn:PULse:SOUrce CH<x>
TRIGger:MAIn:PULse:SOUrce?
?
<Space> <X>
CH
TRIGger
:
:
PULse
MAIn
SOUrce
:
CH<x> specifies one of the input channels.
TRIGGER:MAIN:PULSE:SOURCE CH2
selects Channel 2 as the source for the main pulse trigger.
TRIGger:MAIn:PULse:TIMEOut:POLarity
TDS 500C, 600B, & 700C Only
Sets or queries the polarity for the main pulse timeout trigger. This command is
equivalent to selecting Polarity in the Trigger menu with Type set to Time out.
Trigger
TRIGger:MAIn:PULse:TIMEOut:POLarity { STAYSHigh (or POSITIVe) |
STAYSLow (or NEGAtive) | EITher }
TRIGger:MAIn:PULse:TIMEOut:POLarity?
Examples
Group
Syntax
Arguments
Examples
Group
Syntax