Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–221
MEASUREMENT:MEAS3:DELAY:DIRECTION?
might return FORWARDS for the search direction.
MEASUrement:MEAS<x>:DELay:EDGE1
Sets or queries the slope of the edge that is used for the delay “from” waveform
when taking a delay measurement. The waveform is specified by
MEASUrement:MEAS<x>:SOURCE1. This command is equivalent to selecting
the edges in the Delay Edges & Direction side menu.
Measurement
MEASUrement:MEAS<x>:DELay:EDGE1 { FALL | RISe }
MEASUrement:MEAS<x>:DELay:EDGE1?
MEAS
:
:
MEASUrement
DELay
:
EDGE1
<x>
<Space>
?
FALL
RISe
FALL specifies the falling edge.
RISe specifies the rising edge.
MEASUREMENT:MEAS3:DELAY:EDGE1 RISE
specifies that the rising edge be used for measurement 3.
MEASUREMENT:MEAS1:DELAY:EDGE1?
returns either RISE or FALL for measurement 1.
MEASUrement:MEAS<x>:DELay:EDGE2
Sets or queries the slope of the edge that is used for the delay “to” waveform
when taking a delay measurement. The waveform is specified by
MEASUrement:MEAS<x>:SOURCE2. This command is equivalent to selecting
the edges in the Delay Edges & Direction side menu.
Measurement
Group
Syntax
Arguments
Examples
Group