Filter
Top Products
Operator Tutorial
1502C MTDR User Manual
2–25
10. Press MENU repeatedly until the instrument returns to normal operation.
The waveform on the display is the familiar test cable.
O
F
F
O
F
F
O
N
ac 0.000 ft
O
N
Figure 2–32: Test Cable
11. Short the far end of the test cable.
12. Press VIEW INPUT. The 1502C has done a single sweep, capturing just one
frame.
O
F
F
O
N
ac 0.000 ft
O
N
O
F
F
Figure 2–33: Captured Single Sweep of Shorted Test Cable
13. Remove the short and notice that the waveform does not change.
14. Press VIEW INPUT again and a new sweep will be made and displayed,
showing the change in the cable.
Single Sweep is useful for snap-shot tests of the cable, capturing only one
waveform.