Filter
Top Products
Page 73
880 SERIES
22.12 Wireless Remote Battery Replacement Procedure
1. Start by removing the rubber cover to the
remote (Figure A).
2. Turn the remote unit over and locate the battery door
(Figure B).
3. Rotate the battery door, with a coin, counterclockwise
until the dot aligns with the Open arrow (Figure C).
4. Remove battery door using coin to pry the door upward
(Figure D).
5. Replace battery using CR2025 or equivalent (Figure E).
6. Reinstall the battery cover, using the coin to close
(Figure F).
7. Reinstall rubber cover onto remote (Figure G).
Note: Remote unit is water resistant not waterproof,
therefore the unit should be stored in a dry location
within your home and never be left in the spa while
the cover is on and spa is not in use.
2/3
LIGHTSNC AIR
SPA
JETS
1
2/3
LIGHTSNC AIR
SPA
JETS
1
Fig. AFig. A
105358
www.polyplanar.com
Poly-Planar Inc.
Warminster, PA 18974
(215) 675-7805
Made in China
OPEN
CLOSED
105358
www.polyplanar.com
Poly-Planar Inc.
Warminster, PA 18974
(215) 675-7805
Made in China
OPEN
CLOSED
Fig. BFig. B
OPEN
CLOSED
OPEN
CLOSED
Fig. CFig. C
OPEN CLOSEDOPEN CLOSED
Fig. DFig. D
OPEN
CR2025
CLOSED
OPEN
CR2025
CLOSED
Fig. EFig. E
OPEN
CLOSED
OPEN
CLOSED
Fig. FFig. F
2/3
LIGHT AIR
JETS
1
2/3
LIGHT AIR
JETS
1
Fig. GFig. G