Filter
Top Products
Page 28
880 SERIES
10.6 Selecting The Desired Massage Action
Your Sundance
®
hot tub is equipped to allow you to
customize the massage action you desire. Each model
incorporates a massage selector(s) that allows you to
customize the massage and performance by diverting water between
various jet systems. Simply turn massage selector to position A (Combo),
B, or C to divert water pressure to various jet groups.
Note: This valve is designed to operate in positions A (Combo), B, and
C for optimum performance. It is considered normal for sound levels
within the valve to vary between positions due to the large amounts of
water owing through it. For optimum ltration benets, leave the valve in
position A when hot tub is covered. Select position B or C for maximum
jet performance during hot tub use.
10.7 Adjusting Fluidix Reex, Nex, ST And Intelli-Jets
These jets in your new hot tub offer the advantage of no moving parts
and zero maintenance. They can also be adjusted for a high and low
impact massage, providing the ultimate massage!
To Adjust Jets
1. Fluidix Nex/Intelli-Jets and Reex Jets only: Turn
outer dial (A) clockwise to increase water volume.
Turn outer dial counterclockwise to decrease water
volume or to shut jet off.
2. For a high impact massage, turn corresponding air
control knob clockwise. For the Fluidix ST jet, this
will create a straight water ow. For low impact
massage, turn corresponding air control knob
counterclockwise. For the Fluidix ST jet, this will
create an oscillating ow. Refer to Sections 10.12-
10.17 (pages 31-36) for specic operation details.
The included tool (shown) allows you to position the
jet nozzle angle to your liking. This tool can also be
used to aid in the opening or closing of the nozzle on
Fluidix Reex jets.
Note: Always keep at least 6 adjustable jets open at all
times on each jet system.
B
C
A
B
C
A
AA
AA
Fluidix Inetlli-Jet ShownFluidix Inetlli-Jet Shown
Fluidix Reex JetFluidix Reex Jet
Fluidix ST JetFluidix ST Jet