Page 68
880 SERIES
22.7 Docking your iPod Music Player
1. Docking Your iPod
The Docking Station for iPod is compatible with all dockable Apple
iPod models.
To Install an Apple iPod:
A. Open Docking Station door (A) as
outlined in step 13 (page 62).
B. Center iPod over Docking Station
Interface Port, then gently press
downward as shown (B).
DO NOT FORCE!
C. Close Docking Station door as shown (C),
then press rmly on door directly above
door release latch (15) until you hear an
audible “click.”
WARNING: Electrical Shock Hazard Exists! Never install or
remove iPod while hands are wet or while sitting partially
immersed or fully immersed in spa!
CAUTION: Never leave iPod in Docking Station when spa
is not is use to prevent damage from outdoor elements!
Never spray Docking Station with pressurized water hose
for any reason! Damage to iPod or spa stereo system
caused by water intrusion is not covered under the
manufacturer warranty! Damage to Docking Station port or
iPod due to excessive force or improper alignment during
installation or removal from Docking Station is not covered
under warranty.
2. Setting Up The iPod for Use
A. Select and play preferred song/album/playlist prior to docking
iPod.
B. Press “MODE” button on stereo receiver or wireless remote until
display reads “IPOD.”
Note: USB Docking Station is similar to the iPod Docking Station
operation.