Filter
Top Products
Page 41
880 SERIES
12.5 Temperature Setting Lock
The hot tub’s temperature setting can be locked to prevent unauthorized
changes. When locked, all other hot tub buttons and functions operate
normally.
• To Lock Temperature Setting: Press (UP) or
(DOWN) button to display temperature setting, then
immediately press the (DISPLAY) , (MODE) ,
and (UP) buttons within ve seconds each. A padlock symbol
will appear on the screen.
• To Unlock Temperature Setting: Press (UP) or
(DOWN) button to display temperature setting, then
immediately press the (DISPLAY) , (MODE) ,
and (DOWN) buttons within ve seconds.
12.6 Programming the Change Filter Reminder
Your new hot tub is equipped with a programmable “Change Filter”
reminder icon that ashes on the control panel display after a
specied number of days. It is designed to remind you to perform
routine lter system maintenance on a regular basis but does not affect
hot tub operation in any way. The “Change Filter” reminder icon must be
reset at each interval. It offers a selectable range from 10-120 days or
can be disabled (turned off). We recommend an initial setting of 30 days
(1 month) to remind you of this important maintenance step.
Note: This reminder must be reset at each lter inspection/replacement
interval. Refer to Section 13.1 for lter replacement instructions.
Programming Instructions
1. Press the (CYCLE) button two times. The main display
reads “FIL” indicating the “Change Filter” display program has been
accessed.
2. Press (SELECT) button once to display the currently
programmed duration or to view days elapsed since last lter
cleaning interval.
3. Press (UP) or (DOWN) button to change duration
setting as follows: 0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 - 100
- 110 - 120 - OFF.
Note: Selecting “0” forces the Change Filter reminder icon to stay on
indenitely.
4. Press (DISPLAY) button once to save changes and return to
the standard water temperature display.
Note: If no button is pressed within 30 seconds, all changes are
recorded and the screen automatically returns to the standard water
temperature display.
LOCKEDLOCKED