Filter
Top Products
© 2007 Schneider Electric. All rights reserved. 33
The meter incorporates sealing bars and chassis screws with through-holes,
through which traditional lead/wire seals can be inserted. When utilized,
these lead/wire seals effectively prevent unauthorized personnel from
gaining access to meter internals or to buttons under the cover.
These seals are installed as follows:
1. Insert the sealing wire through both the screw hole and sealing bar.
2. Twist the wire and crimp the lead-sealing tab on to the wire.
Cover
Sealing Point
Front of Meter
Front Panel
Sealing Point
Front Panel
Sealing Point
Lead Sealing Tab
Sealing Wire
Sealing Bar
Screw with
Through-hole