Filter
Top Products
© 2007 Schneider Electric. All rights reserved. 25
1
A baud rate of 300 bps is only intended for paging applications.
2
Serial number = PA-0302B222-01, Unit ID = 2222
3
Available on ION8800A and B meters only.
Format
Phase Labels Specifies how phases are labelled ABC, RST, XYZ, RYB, 123 123
PF Symbol LD (leading)/LG (lagging) LD/LG, +/-, CAP/IND LD/LG
Digit Group
Specifies symbols used to delimit
thousands and decimal place holder
1000.0 or 1,000.0 or 1000,0 1000,0
Date Format Specifies how dates are displayed
MM/DD/YYYY, DD/MM/YYYY,
YYYY/MM/DD
MM/DD/
YYYY
Show DST Determines if DST is shown or not Yes or No Yes
Volts Decimal
Number of decimal places
displayed for voltages
1. to 123 456 789,XXX 1,XX
Current Decimal
Number of decimal places
displayed for currents
1. to 123 456 789,XXX 1,XXX
Power Decimal
Number of decimal places
displayed for power measurements
1. to 123 456 789,XXX 1,XXX
Display
Update Rate
Sets when the display updates (in
seconds)
1 to 6 1
Contrast Higher numbers are sharper 0 to 9 7
Backlight Timeout
Specifies the time it takes (in
seconds) for the backlight to turn off
(0 = the display stays lit indefinitely)
0 to 7 200 (two hours)
300 (five
minutes)
DMD Lock
Controls the minimum allowable
time between consecutive demand
resets (in seconds)
0 (disabled) to 5 184 000
(60 days)
216 000
(25 days)
TEST Mode TO
Defines how long the meter remains
in TEST mode before switching back
to NORM mode
30 minutes
Display Scale
Determines the scale applied to
displayed parameters
1 to 999 999 1000
Scaling Mode
Specifies whether parameters are
divided or multiplied by the scale
before being displayed
Multiply or Divide Divide
Delta Vectors
Specifies how vector diagrams are
displayed when in Delta mode
System or Instrument System
Security
Modify Passwd Modifies standard password 0 to 999 999 999 0
Disable Security Disables meter security Disabled or Enabled Enabled
Web Config Allow configuration via web server Disabled or Enabled Enabled
Ack Alarms
Sends a pulse to acknowledge
alarms when selected
--
Menu Setting Description Range (Values) Default