Filter
Top Products
12
2 Connect air tubing
Connect the air tube firmly onto the air outlet at the front of the unit.
Figure 4: Front view of AutoSet CS2
To attach the pressure sensor tube to the unit, screw the Luer connector onto the
socket on the side of the unit.
Figure 5: Twisting the Luer lock connectors together
!
WARNING
Use care when handling the air tubing. Be particularly careful when attaching the
Luer connector to the A
UTOSET CS2. If you kink or excessively twist the sensor
tube, it may affect the protection offered by the mask pressure alarm system.
Air tubing connector
Pressure sensor tube
connector
eng.book Page 12 Friday, November 3, 2006 2:43 PM