Filter
Top Products
9
THE AUTOSET CS2 SYSTEM
ENGLISH
THE AUTOSET CS2 SYSTEM
AUTOSET CS2 COMPONENTS
The AUTOSET CS2 flow generator is supplied with air tubing and a power cord.
Masks are supplied separately, as you and your clinician have to decide which mask is
best for you. Masks that can be used with A
UTOSET CS2 are listed on page 10.
Some people experience dryness of the nose, mouth and throat while using the
A
UTOSET CS2 system, especially during winter. Others may experience sneezing and/
or a runny or blocked nose during the first few weeks of A
UTOSET CS2 treatment. In
many cases, these symptoms of nasal irritation can be resolved with a humidifier. See
page 14 to connect a humidifier to the A
UTOSET CS2.
Figure 1: AutoSet CS2 flow generator
The control panel allows you to adjust settings on the flow generator, and the LCD
screen displays information about your treatment. See “Control Panel Functions” on
page 22.
Figure 2: Rear of AutoSet CS2
The AUTOSET CS2 can run on AC or DC power. See page 11 to see how to connect
the power cords and use the locking device. See page 17 to connect a R
ESLINK™. See
page 36 to replace the air filter.
Air tubing connector
Pressure sensor
Control panel
LCD screen
Removable
front cover
tube connector
Carry handle
Air filter
Power cord
ResLink attachment point
eng.book Page 9 Friday, November 3, 2006 2:43 PM