Filter
Top Products
INSTALLATION
A-2 A-2
EAGLE™ 10,000
TECHNICAL SPECIFICATIONS - EAGLE 10,000 (K2343-1,K2343-2)
INPUT - GASOLINE ENGINE
RATED OUTPUT @ 104°F (40°C)- WELDER
HEIGHT WIDTH DEPTH WEIGHT
30.3 in. 19.1 in. 42.0 in. 502 lbs. (228kg)
770 mm 485 mm 1067 mm
RATED OUTPUT @ 104°F (40°C)- GENERATOR
Welding Output
DC Constant Current 210A / 25V / 100%
Auxiliary Power
1
9,000 Watts Continuous, 60 Hz AC
10,000 Watts Peak, 60 Hz AC (K2343-1)
10.500 Watts Peak, 60 Hz AC (K2343-2)
120/240 Volts
PHYSICAL DIMENSIONS
Make/Model
K2341-1
Kohler
CH20S
K2343-2
Kohler
CH23HS
Description
2 cylinder
4 Cycle
Air-Cooled
Gasoline
Engine.
Aluminum Alloy
with Cast Iron
Liners,
Electronic Start
Operating
Speed (RPM)
High Idle 3700
Full Load 3500
Low Idle 2200
Displacement
cu. in.
(cu.cm.)
41(724)
Kohler
Capacities
Fuel:
9 Gal (34 L)
Lubricating Oil:
2.0 Qts. (1.9 L)
Horsepower
23 HP@
3600 RPM
Honda
Starting
System
12VDC
Battery
Electric Start
Group 58
Battery
(435 cold
Cranking
Amps)
1. Output rating in watts is equivalent to volt - amperes at unity factor.Output voltage is within +/-10% at all loads up to rated capacity.
When welding available auxiliary power will be reduced.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC