Filter
Top Products
OPERATION
B-3 B-3
EAGLE™ 10,000
RANGE SWITCH
The “Range” switch is used to select one of three
amperage ranges with generous overlap for Stick/TIG
welding, or one Wire Feed welding range
Never change the “RANGE” Switch setting while
welding. This will damage the switch.
------------------------------------------------------------------------
CONTROL DIAL
The Control Dial provides a fine welding current adjust-
ment within the Range Switch settings.
CAUTION
KOHLER
CH20S or CH23S
.39 Gallons/Hour
(1.49 Liters/Hour)
.74 Gallons/Hour
(2.79 Liters/Hour)
1.29 Gallons/Hour
(4.87 Liters/Hour)
1.40 Gallons/Hour)
(5.31 Liters/Hour)
Low Idle - No Load
2200 RPM
High Idle - No Load
3700 RPM
DC CC Weld Output
210 Amps @ 25 Volts
Auxiliary Power
9000 Watts
EAGLE 10,000 APPROXIMATE FUEL CONSUMPTION
Process Range Setting Current Range
STICK/TIG
(constant current)
(3 range settings)
90 Max.
145 Max.
210 Max.
50 to 90 Amps
70 to 145 Amps
120 to 210 Amps
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC