Filter
Top Products
GS3 2630 Advanced Settings
CF86321,000027D -19-16MAY11-6/9
Continued onnext page CF86321,000027D-19-16MAY11-7/9
Step 2: Optimize Acquire Sensitivity
PC8797 —UN—21FEB06
Acquire Sensitivity Too Low
PC8796 —UN—21FEB06
Acquire Sensitivity Too High
•
Tune speed by operating parallel to and 1.2 m (4 ft) off
of the A-B Line.
•
Activate AutoTrac Controller and observe performance.
•
Tune Acquire Sensitivity until machine acquires the line
smoothly.
PC8999 —UN—08MAR06
A—Desired Track—Broken
Line
B—Actual Track—Solid Line
Step 3: Optimize Line Sensitivity
PC8794 —UN—08MAR06
Line Sensitivities Too Low
PC8795 —UN—08MAR06
Line Sensitivities Too High
A: Line Sensitivity—Tracking
•
Tune line sensitivity tracking while operating on the
A-B line.
•
If machine wanders too far from the A-B line adjust line
sensitivity—tracking higher.
•
If machine becomes unstable around A-B line adjust
line sensitivity—tracking lower.
B: Line Sensitivity—Heading
•
Tune line sensitivity heading while operating on the
A-B line.
•
If the front of the machine wanders too far from the
track direction adjust line sensitivity—heading higher.
•
If machine becomes unstable adjust line
sensitivity—heading lower.
PC8999 —UN—08MAR06
A—Desired Track—Broken
Line
B—Actual Track—Solid Line
NOTE: Line Sensitivities work together—If both are set too
high the vehicle will become unstable. If both are set
too low, the vehicle will wander around the A-B line.
45-7
090811
PN=61