Filter
Top Products
GS2 Display 1800
CF86321,0000395 -19-01JUN11-1/2
CF86321,0000395 -19-01JUN11-2/2
Guidance Settings
Optimal performance of the GreenStar system usually
requires adjustment of settings. Access Guidance settings
to customize your user experience and optimize the
system performance.
General Settings
Turning View - assists the operator view the next track
when turning around. To turn ON/OFF, select / unselect
check box.
Turn Predictor - alerts operator by predicting the end of
pass. To turn ON/ OFF, select / unselect check box.
Tracking Tones – provide an audible indication off-track
error. To turn ON/ OFF, select / unselect check box. To
change distance at which tracking tones make a sound,
select input eld, scroll the thumb wheel to the desired
value, and press Enter. Values between 10—60 cm
(4—24 in.) may be entered.
Lead Compensation – shows how far down current track
guidance looks to for such things as turns. It is used with
PC10857JN —UN—13APR09
GreenStar Main Page
PC10857JF —UN—13APR09
Settings
PC10857NG —UN—27APR09
Guidance Settings
Parallel Tracking only. To turn ON/OFF, select / unselect
check box.
Shift Track – is used to adjust the position of guidance
tracks left or right to compensate for GPS drift. This
setting will turn shifts ON/OFF, select small shifts or large
shifts, and change the distance of each shift.
Shifts Off – Check the box to turn shifts OFF.
Small Shifts – Select Small Shifts to use a Shift Size of
1—30 cm (0.4—12 in.).
Large Shifts – Select Large Shifts to use a Shift Size of
1— 410cm (12-161.5 in.). Large Shifts are disabled when
AutoTrac is active or when operating in Adaptive Curve
Track mode.
Shift Size – Distance that tracks shift when SHIFT LEFT
or SHIFT RIGHT buttons are selected.
PC10857NH —UN—27APR09
30-9
090811
PN=35