Filter
Top Products
GS3 2630 Display
BA31779,0000226 -19-08JUL11-1/2
BA31779,0000226 -19-08JUL11-2/2
StarFire
AutroTrac controller takes its StarFire Height and Fore-Aft
measurements from the StarFire setup. To change
this information select the menu button then select the
StarFire button. The StarFire main page will appear.
Select the Setup tab (A) at the top of the screen.
PC8663 —UN—05AUG05
Menu Button
PC13738 —UN—17MAY11
SF3000 Button
StarFire Height (in.) Enter the height of the StarFire
receiver into the Height box (C) of the StarFire Setup
screen. Height is measured from the ground to the center
(where the green and yellow meet) of the dome.
StarFire Fore-Aft (in.) Enter the Fore-Aft measurement
into the Fore/Aft box (B) of the StarFire Setup screen.
This is the distance from the xed axle of the machine to
the receiver. The xed axle is the rear axle on a row crop
tractor. The xed axle is the front axle on an articulated
tractor
NOTE: For more information on StarFire setup
see the StarFire operators manual that
matches your equipment.
PC13726 —UN—19MAY11
StarFire Setup Screen
40-5
090811
PN=54