Filter
Top Products
48 | HP Jornada 680/680e Users Guide
Before you can synchronize remotely, the desktop PC or
network server must be configured for Remote Access
Services (Windows NT) or Dial-Up Networking (Windows95
or later), and you must create a connection on your
HPJornada by using either the HP Jornada dialup applica-
tion or the Remote Networking program. For information
about setting up connections with HP dialup, see the Set-
ting up a remote connection to your network section
in chapter 6. For Remote Networking information, see the
Accessing a computer not on a network section in this
chapter. After you have set up for either type of connection,
you can synchronize data. See the To start remote syn-
chronization procedure later in this chapter.
Accessing a computer on your corporate network
To access a PC on your corporate network from a remote
location, you must have an account provided by your network
administrator, and you must set up a connection to your
network server using HP dialup (see chapter 6). In addition,
you must set up the target PC to receive your calls as
follows.
The target PC must be turned on.
Windows CE Services must be set up on the target PC.
(See the Installing Windows CE Services section
earlier in this chapter.) Also, the Auto Connect option
should be set to At all times.
Windows CE Services must be running, and the Waiting
for mobile device to connect status message must be
shown in the Mobile Devices window.
In the Windows CE Services Properties dialog box,
Enable a network connection must be selected.
Any folders or drives you want to access must be shared.
If you will be dialing in to a desktop PC running Windows95, you must also have Dial-
up Networking components set up on the target desktop PC.