Filter
Top Products
130 | HP Jornada 680/680e Users Guide
To install a CompactFlash Card
1. Press the latch-bar located at the opening of the
expansion module with your finger. The expansion
module will spring open.
2. Insert the CompactFlash Card by sliding it into the
expansion module along the glide rails.
3. Close the expansion module by pushing down until it
is flush with the underside of the unit. The expan-
sion module should lock in place. You will be able to
see the top edge of the card through the slit between
the expansion module and the unit.
If you have difficulty opening the expansion module, use your thumbs to apply pressure
at the base of the expansion module (near the backup battery compartment) while you
press the latch-bar.
To remove a CompactFlash Card
1. Press the latch-bar located at the opening of the
expansion module with your finger. The expansion
module will spring open.
2. Remove the CompactFlash Card. Insert your finger-
nail into the notch on the card to pull the card from
the unit.