Filter
Top Products
90
Maintenance
Fuses
The machine’s electrical system is fused by three
different types of fuse:
1. Automatic fuses; These reset automatically after a
short-circuit in the circuit. No corrective action
required by the operator.
2. Fusible link of the high output type; Replaced by
the operator.
FU12 is located in a box on a bracket behind the battery
and FU13 in a box on the top of battery's positive pole.
FU12 50 A Supply fuse for the printed circuit board.
FU13 125 A Main fuse.
If FU12 blows only the indicator panel works.
If FU13 blows the entire machine will be dead.
Replacing fuses: Open the box cover and replace the
fuse, which is secured by two nuts.
3. The fusible links are of the flat pin type. Replaced
by the operator.
These fuses are located in two places. One fuse
behind the battery:
FU3 10 A Red Control circuit (max. 10A).
If FU3 blows the entire machine will be dead.
Fuses
Fuses FU3, FU12