Filter
Top Products
62
Driving
3. Turn the ignition key to the glow plug heating
position and keep it there until the warning light on
the steering wheel console goes out and the
starter motor engages. Glow plug heating is
dependent on the engine temperature. If you
require an extend glow plug heating period, you
must wait in the OFF or ON position for 4 seconds.
If the glow plug heating lamp does not come on
and the starter is not engaged, check that the
parking brake is engaged and that the drive pedals
are not actuated. Starting without glow plug
heating (warm engine) is possible if you turn the
ignition key to glow plug mode, back to ON and to
glow plug heating again within 2 seconds.
4. When the engine starts, immediately release the
ignition key back to the intermediate position.
IMPORTANT INFORMATION:
Ignition key, glow plug heating and start position
Do not run the starter motor for more than
15 seconds at a time. If the engine does not start, wait
about 30 seconds before trying again.
Starter key, intermediate position (ON)