Filter
Top Products
63
Driving
5. Set the desired engine speed (even idle) using the throttle
control.
Allow the engine to run at a moderate speed, for
3-5 minutes before loading it heavily.
Starting in cold conditions
If the engine does not start due to cold conditions,
repeat glow plug heating and try starting again.
Start gas or ether must not be used.
WARNING:
Never run the engine indoors, in enclosed or badly
ventilated areas. Engine exhaust fumes contain
poisonous carbon monoxide and carcinogenic
substances.
Engine speed control in idling mode
Start gas or ether must not be used