Filter
Top Products
29
Presentation
Chapter 4: Presentation
Congratulations on your choice of an exceptionally
high quality product. This operator's manual describes
Husqvarna PT 26D.
It is fitted with a Perkins 3 cylinder diesel engine
developing 26 horse power.
PT 26D is equipped with hydraulic steering and
attachment lift. They are supplied with pressure from a
pump on the engine.
The machine is all wheel drive in low speed mode.
The power transmission from the engine is hydrostatic.
It is supplied with pressure by a pump under the
driver’s seat. A shaft with two flexible couplings
powers the pump. Flow and direction are regulated
with the pedals, so that forward and reversing speeds
are variably controlled. One pedal to drive forwards (1)
and one pedal to reverse (2). The pump drives four
hydraulic motors in parallel, one for each wheel.
The power transmission is also used as service brake.
There are low and high speeds for driving. High or low
speed is selected using a switch.
PT 26D
Speed control