Filter
Top Products
77
Maintenance
Cleaning
Clean the machine directly after use. It is much easier
to wash off grass cuttings before they dry.
Oily dirt can be removed using a cold degreasing
agent. Spray a thin layer and wait a few minutes.
Rinse at normal water pressure. Do not direct the jet
towards electrical components or bearings.
Do not rinse hot surfaces, for example, the engine and
exhaust system.
WARNING:
No service operations may be performed on the
engine or cutting unit unless:
• The engine is stopped.
• The parking brake is on.
• The ignition key has been removed.
Clean the machine immediately after use