Filter
Top Products
73
Maintenance
Lubricate according to lubrication chart
3
111 ●●
Clean the air filter and empty the
particle trap
84 ●●
Check the blades 104 ●
Change the engine oil and filter
1
118 ●
Replace hydraulic oil filter and check
the oil level
4, 5
122 ●
Check the tension and condition of
the belts (generator belt, power take-
off belt, cutting unit belt)
80
105
107
●
Check the condition of the battery,
clean if necessary
89 ●
Check the oil level in the bevel gear,
top up if necessary
114 ●
● = Described in this manual
❍ = Not described in this manual.
Maintenance Page Daily main-
tenance
Weekly
main-
tenance
Maintenance interval hours
befor after
500 1000 2000 3000250