Filter
Top Products
C 4.74
Operating instructions
78 149 443
Operating the implements
G
v
G
H
T
v
T
H
abcd
Additional information on implements
Do not exceed the permissible total weight,
the permissible axle loads and tire carrying
capacities of the vehicle when installing im-
plements on the front and rear 3-point lift. The
front axle of the vehicle must always be loaded
with at least 20 % of the vehicle’s kerb weight.
Before purchasing equipment, make sure these
conditions are met by performing the following
calculations or by weighing the vehicle-equip-
ment combinations.
Determining the total weight, axle loads and tire carry-
ing capacity including the minimum ballasting.
For their calculation you need the following data:
T
L
(kg) Kerb weight of the vehicle
1)
T
V
(kg) Front axle load of the empty vehicle
1)
T
H
(kg) Rear axle load of the empty vehicle
1)
G
H
(kg) Total weight of
rear implement/rear ballast
2)
G
V
(kg) Total weight of
front implement/front ballast
2)
a (m) Clearance between centre of gravity
of front implement/front ballast and
centre of front axle
2) 3)
b (m) Vehicle wheelbase
1) 3)
c (m) Distance between centre of rear axle
and centre of lower link ball
1) 3)
d (m) Distance between centre of
lower link ball and centre of gravity of
rear implement/rear ballast
2)
1)
See technical data in the operating instructions
2)
See price list and/or operating instructions of the implement
3)
Measure