Filter
Top Products
C 4.74
Operating instructions
184 149 443
Maintenance every 1500 hours
1
Bild_C260
2 3
Bild_C261
Clean the filter for the traction and working hydraulics
return line and change it, if necessary.
- Remove the filter cover (1).
- Pull the filter element out.
ATTENTION
Observe the instructions for handling fuels
and lubricants.
Clean:
- Clean the filter element with clean diesel fuel.
Change:
- Install a new filter element in filter housing.
Refitting is the reverse of removal.
Check / clean the suction filter for working hydraulic
system
- Remove the banjo bolt (3) and move the line to the
side.
- Remove the filter cover fastening screws (2).
- Pull the filter housing out with the straining star filter.