Filter
Top Products
Operating instructions
149 443 185
C 4.74
Maintenance every 1500 hours
Bild_C262
4 5
ATTENTION
Observe the instructions for handling fuels
and lubricants.
Clean:
- Wash the straining star filter with clean diesel fuel.
Change:
- Remove the straining star filter from the filter housing
with a 24mm open-ended wrench.
- Fit a new toroidal sealing ring on the new filter and
screw it on to the filter housing.
Refitting is the reverse of removal.
- Refit the oil drain plug with a new seal. Check for oil
leaks.
- Fill recommended hydraulic oil through the filler neck
(4).
Filling capacity .................................... approx. 42 litres
- Check the oil level with the oil dipstick (5).
- Refit the filler neck cap.
- Start the engine. Operate the implements and steering.
- Drive the vehicle briefly back and forth.
NOTE
The air in the hydraulic system is bled auto-
matically.
- Shut off the engine and relieve any pressure in the
hydraulic system.
- Check for leaks.
- Check the oil level with the oil dipstick (5). Add
hydraulic oil if necessary.