Filter
Top Products
Operating instructions
149 443 133
C 4.74
Transport, hoisting, towing
ATTENTION
If the parking brake can not be released due
to a lack of pressure in the accumulator and
pressure can not be built up on account of a
failure of the engine or hydraulic system, re-
move the brake cable on the hydraulic cylin-
der so that the vehicle can be towed.
DANGER
Secure the vehicle against rolling with chocks.
CAUTION
The brake cable is very taut - risk of injury.
- Remove the bolts (1) on the left and right side of the
protective hull.
- Remove the protective hull (2).
- Remove the boot (3) on the right and push it back.
- Loosen the locknut (4).
- Fully remove the setscrew (5).
The parking brake may only be restored by an authorized
workshop.
1
12
Bild_C286
3 4
5
Bild_C287