Filter
Top Products
C 4.74
Operating instructions
128 149 443
Trailers, towing
Bild_C269
1
2 43
5
6
Operating the trailer hitch manually, attaching trailers
- Put the trailer hitch (5) in the two lower holes provided
on the adjustment rail (2) with the fastening pin (3)
and secure the pins with the retaining clips.
Bearing load
ATTENTION
The bearing load must be at least 25 kg (4 % of
the trailer load), while the maximum bearing load
must not exceed 600 kg.
If the bearing load is underrun or exceeded when
unloading the trailer, the load must be shifted
so that the bearing load returns to the permis-
sible range.
- Drive the vehicle in front of the trailer to be attached.
DANGER
The trailer must be secured against uninten-
tional movement (rolling).
- Push the safety (1) down and pull the tow pin (6) out
of the hitch (5).
DANGER
Make sure no-one is standing between the
vehicle and trailer.
- Drive the vehicle with the coupler head into the trailer
tongue.
- Reinsert the tow pin and lock it.
- Connect the trailer lighting to the connector socket (4).
- Remove the wheel chocks from the trailers.