Hitachi E43 Portable Generator User Manual


 
15
English
PERIODIC MAINTENANCE SCHEDULE
Daily Every Every Every
Before 3 mos./ 6 mos./ year or
Starting 50 hrs. 100 hrs. 300 hrs.
*Engine Oil Check Level X
Change X
*Air Cleaner Check X
Clean X (1)
*Sediment Cup Clean X
*Spark Plug Clean-Readjust X
Replace X
Spark Arrester Clean X
Vibration Isolators Check-Tighten X
*Valve Check X (2)
Clearance -Readjust X (2)
*Fuel tank & filter Clean X (2)
*Fuel line Check Every 2 years (replace if necessary)(2)
*Emission related items
(1) Service more frequently when used in dusty areas
(2) An authorized HITACHI Service Center should service these items or authorized Honda Service Center.
For commercial use, log hours of operation to determine proper maintenance intervals.
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure complete and rapid draining.
1. Remove oil fill plug and drain plug to drain oil as shown in Fig.15.
2. Reinstall drain plug. Tighten the plug securely.
3. Fill engine crankcase with recommended oil (See page9). Check oil level (Fig.16).
4. Reinstall oil filler cap.
OIL CAPACITY
HITACHI Model Quarts Liters
E43 1.16 1.10
E60 1.16 1.10
E71 1.16 1.10
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil and containers in a manner that will not harm the natural environment. We
suggest you take it in a sealed container to your local service station or recycling center for reclamation. Do
not throw it in the trash, pour it on the ground or down the drain.
NOTE: Never operate the generator without oil cap tightly secured. Failure to do so could cause oil to spill
out of the engine.
AIR FILTER
Adirty air cleaner will restrict airflow to the carburetor. To prevent carburetor malfunction, service the air filter
regularly. Service more frequently when operating the generator in extremely dusty areas.
TRAY
OIL DRAIN PLUG
OIL FILLER CAP
UPPER LIMIT
LOWER LIMIT
WARNING:
Using gasoline or flammable solvent to clean the filter element can cause a fire or explosion.
Use only soapy water or nonflammable solvent.
NOTE: Never run the generator without the air cleaner. Rapid engine wear will result.
1. Unsnap the air cleaner cover clips, remove the air cleaner cover, and remove the element as shown in
Fig.17.
Fig.15 Fig.16