Filter
Top Products
Operational overview 5
Operational overview
In this section
User guide overview................................................................................................................................. 5
Server management.................................................................................................................................. 5
Server management features...................................................................................................................... 5
User guide overview
This guide covers the standard and optional operational features of the LO100 used in HP ProLiant DL140
G2, DL145 G2, ML150 G2, and ML110 G3 servers.
This guide is an update to the HP ProLiant DL140 G2, DL145 G2, ML150 G2, and ML110 G3 LO100
remote management user guides.
Server management
HP ProLiant Lights-Out 100 delivers basic remote control of vital server resources, supports IPMI 2.0, and
provides system administrators with access to the server at any time, even before an operating system is
installed on the server.
HP ProLiant Lights-Out 100 provides text mode console redirection, DMTF SMASH compliant command
line interface, and browser access to many of the same system management functions. You can access
LO100 through a dedicated Ethernet port or through the server serial port.
Server management features
Using the Lights-Out 100 Remote Management processor, you can:
• Switch between console redirection and the command line using either the dedicated management
or serial port
• Communicate securely using SSL and SSH
• Remotely power up and power down the server
• Perform warm or cold server reboots
• Reboot the server to a virtual floppy
• Remotely monitor server-state voltage, fan speed, and system state (S0 or S5)
• Access the System Event log
• Configure TCP/IP settings for the NIC
• Change user passwords
• Access the BMC and server controls using a standard browser or new industry standard SMASH CLP
command-line interface