Filter
Top Products
Using LO100 46
— Console Redirection: Enabled
— Baud Rate: 9600
— Terminal Type: VT100+
— Flow Control: None
— Redirection After BIOS POST: On
4. Press the Esc key to return to the previous screen, or press the F10 key to save the changes and exit
Setup.
After enabling Windows® EMS management, you can view the Windows® EMS management console
remotely from a client computer through an established telnet session to the IP address of the target server
by pressing the Esc+Q keys. To end an EMS session press the Esc+( keys. See your operating system
documentation for instructions on establishing telnet sessions.
NOTE: If you encounter problems logging in to the remote console, be aware that some telnet
programs might require you to enable their send line feed at end of line option. If
the remote console does not respond to the Enter key, try setting this option in your telnet
program.
HP SIM support
HP SIM discovers LO100 and enables you to identify and launch LO100. See your HP SIM user guide for
more information on using HP SIM with LO100.