Filter
Top Products
Using LO100 29
Logging in through the CLP
To log in to the remote management processor through the CLP and enter Terminal mode:
1. Establish a connection to the remote management processor by launching a telnet session or an SSH
session.
2. Enter the user name at the login: prompt. The default user name for the Administrator account is
admin. The default user name for the Operator account is Operator.
3. Enter the password at the password: prompt. The default password for the Administrator account is
admin. The default password for the Operator account is Operator.
To exit the CLP and enter Console mode, enter the exit command at the command prompt.
Browser main menu options
The main menu provides access to all basic remote management capabilities of the remote management
processor.
Option Description
Home Accesses or returns you to the main menu
navigation bar
Virtual Power Accesses system power control options
Monitoring Sensors Lists all sensor information, including type,
name, status, reading, and PEF settings
System Event Log Displays the system event log
Virtual Floppy Accesses the virtual floppy screen
Hardware Inventory Displays system hardware
User Administration Accesses the user configuration screen
Network Settings Accesses the network parameter settings
screen