Filter
Top Products
SECTION 6 GPIB
6-1
SECTION 6
GPIB
6.1 Outline of GPIB
6.1.1 Overview
The MG3641A/MG3642A synthesized signal generator can automate the measurement by a combination with an
external controller and other instruments.
This device conforms to the institute of electrical and electric engineers (IEEE) std 488.1-1987. The software
standard conforms to IEEE488.2 and standard commands for programmable instruments (SCPI).
6.1.2 GPIB functions
This device has the following four GPIB functions:
• Control of all the functions excluding the [Stby/On] switch and [Local] key
• Reading all setting conditions
• Setting a GPIB address from the panel
• Synchronous control of frequency and level in only mode