Filter
Top Products
Replaceable Parts
Assembly and Disassembly Guidelines
5-22 Agilent E4418B/E4419B Service Guide
Replacing the Rear Panel Recorder Output(s) Cable
Assembly
1. Disassemble the power meter down to allow access to the rear panel
connectors. (Refer to “Removing the A4 Comms Assembly”, on page 5-11).
2. Replace the recorder output cable assembly using the replacement kit and
the torque indicated on the following diagram.
Note Recorder output A connects to A4 J23 and recorder output B connects to A4
J24.
25 lb/in