Filter
Top Products
Assembly 21
MAN0160 (Rev. 2/22/2006)
Model: TA
Install Hydraulic Tilt Kit
NOTE: If Rear Blade is equipped with hydraulic angle
cylinder, route tilt kit hydraulic hoses as shown in Fig-
ure 18.
Figure 18. Hydraulic Tilt and Angle Kit Hose Routing
1. Attach hose clamp (3) to boom as shown in Fig-
ure 19.
2. Position tape marked on hoses (6) at hose clamp
(3).
3. Secure hose clamp (3) with cap screw (15), lock
washer (16), and hex nut (17).
3. Hose Clamp 5/8
6. Hose, 3/8 138 1/2 NPTM 3/4 JICF
(from Tilt cylinder)
15. Cap Screw 5/16 NC x 1 GR5
16. Washer, Lock 5/16
17. Nut, Hex 5/16 NC
Figure 19. Hose Clamp Installation
CD5996
CD5996-1
3
15
16
17
6