Filter
Top Products
4 Introduction
MAN0160 (Rev. 8/19/2005)
RB750-4 & RB850-4 SPECIFICATIONS
MODEL RB750-4 RB850-4
Blade Width 7 ft. (2133 mm) 8 ft. (2438 mm)
Tractor HP Requirement 100 HP Maximum 100 HP Maximum
(75 kW) (75 kW)
Weight:
M = Manual 811 lbs. (368 kg) 856 lbs. (388 kg)
H = Hydraulic 1010 lbs. (458 kg) 1050 lbs. (478 kg)
Model Codes:
M = All Manual: Angle, Tilt & Swing
MA = Manual Swing & Tilt; Hydraulic Angle for tractors with at least one hydraulic port
MT = Manual Swing & Angle; Hydraulic Tilt for tractors with at least one hydraulic port
SA = Manual Tilt; Hydraulic Swing & Angle for tractors with at least two hydraulic ports
TA = Manual Swing; Hydraulic Tilt & Angle for tractors with at least two ports
H = All Hydraulic; Angle, Tilt & Swing for tractors with three hydraulic ports
Blade Position - Mechanical . . . . . . Straight, forward or reverse;
Angle 15, 30, 45 & 60 degrees, right or left in forward;
15 & 30 degrees in reverse;
Tilt 15 or 30 degrees up or down;
Offset 12" or 24" (305 mm or 610 mm) left or right of
tractor center line;
Pitch adjustment in top link of tractor 3-point hitch
Blade Positions - Hydraulic . . . . . . . Straight, forward or reverse;
Angle 45 degrees right or left forward and reverse;
Tilt 22 degrees up or down;
Offset 24" (610 mm) right or left of tractor center line;
Pitch adjustment in top link of tractor 3-point hitch
Cutting Edge . . . . . . . . . . . . . . . . . . 1/2 x 6" (12.7 mm x 152 mm) High carbon steel, reversible
3-Point Hitch Category . . . . . . . . . . Category 2
Category 2 Quick attaching coupler, with bushing kit #18295
Category 3, with bushing kit #18295
Structural Strength:
A-Frame . . . . . . . . . . . . . . . . . . . . . 8 x 4 (203 mm x 102 mm) Formed channel
Boom. . . . . . . . . . . . . . . . . . . . . . . . All-welded box section
King Pin. . . . . . . . . . . . . . . . . . . . . . 6-5/8" (168 mm) Tubing
Moldboard. . . . . . . . . . . . . . . . . . . . Formed moldboard and all welded box section
Pivot Assembly . . . . . . . . . . . . . . . . All-welded steel box section